Use Wire 9.6 k interface setting in the XCT
Logbook, select a flight, use Send Option.
Now comes the tricky part.
The code is at the moment not clever enough to wait and try again.
One has to first press on the T3D2 side the Get Track and immediately also press the Sel button on the XCT
If one gets an error, due to the data being sent out of sync,
then one has to
Break on the XCT
Press in T3D2 the Get Track again to clear any remaining leftover
bytes.
Then try again.
Good luck.
If there is a demand for improving this, let me know and I put some effort into it.